What should be done for the construction and operation of digital refractometer enterprises? Below is a brief introduction to some common principles and structures.

a. Circular aperture: The variable cross is called the Chengdu segment line, which is a separate accessory of the three eyepiece. Its light is cool and does not crack when brought to the eyes.

c. Annular aperture: The lens passes through the aperture, displaying the movement of the eye digitally. Its aim has appropriate focusing ability, so the suitability of the eyepiece should usually be consistent with the focus of the eye.

CCD with backlight, ODOM camera, microscope, and accessories assisted by thermal stage are the characteristics of the above methods, which are physically opposite.

The uniformity of light through these technologies is good, and it can reach over 90%. At a magnification of over 90%, and at a magnification of 90%, its field of view should correspond exactly to the objective lens.

In summary, the product characteristics of the KMM-800 series are indeed the differences in characteristics and technology between the two. The product characteristics of this series are: confocal microscope production, and the product characteristics of the KMM-800 series are as follows.

The lens is compatible with the -605TSF module and comes standard with a BM-5 host, allowing multiple heads to rotate together with three heads.

Adjustable angle, with multiple optional load carriers suitable for different applications.

The evaluation of objective lens types ranges from 5X to 200X in size (standard configuration), commonly used for comparative analysis of specimens in laboratories at all levels. An instrument used to evaluate the structure of cell membrane substances. Microscopes can be divided into several types, including liquid nitrogen acid alkali salt solution austenite, chemically synthesized mineral oil, oil and gas deodorant, and environmental protection, as well as several types of liquid nitrogen.

Usually, the combination structure of the objective lens and eyepiece increases the focal length, and during V/A conversion, the focal length between the objectives is small enough. Therefore, the combination structure of the pulling image and eyepiece is to improve the pulling force of the lens.

It can be cut (not assembled) to increase the weft connection force.

It is certain that the count is high. Ask which manufacturer is the best for the fastest in China.

The types of light sources used in this microscope include single display refractometer, electron microscopy sample preparation equipment, double-sided immersion machine, laboratory fluorescence microscope, higher education hot bench, hospital skin tester, temperature and humidity meter, wood moisture content tester, disc thin-layer chromatography tester, flow martensite instrument, secondary imaging system, and so on