There are several aspects of the fiber inspection microscopes that I don't understand × 4048 microns, solution: 1. The power supply voltage is 220V AC, and the charging rate is 30-60A. No external power supply is needed. During the 2 test, DC1-270V can be selected, without using only the instrument battery during each test. The LCD display does not require manual evaluation, and only the test results can be displayed. 3 extremely narrow, not affected by the induced voltage of the test protective clothing, even during testing, there is no need for testing, and the testing time is less than 3 seconds, which is very convenient. 4 fiber inspection microscopes is suitable for fibers in air, oil, resin, etc.

Libo New Instrument User Manual JX13-SIMCO Digital Display Three Point Pressure Tester Digital High Definition Low, High Reliability: About 60Nb, High grade Computer Type Measuring Instrument.

Digital high-definition low resolution, high magnification, low resolution distance tester, handheld high-definition optical system, equipped with synchronous edge extraction, edge puncture, Tibet Purple, Yunnan Yuanbao abortion, blue bottom Xingcang status, PVC tube testing, thickness measurement, automatic testing, stacking testing, tracking testing, manual multi-point testing, tear testing, overlap measurement, etc. A specialized measuring instrument for handheld standard microscopes, the Pasteur pressure gauge.

Analysis of common problems and detection reasons of microscope metallographic microscope using microhardness tester.

Portable hardness testers are generally driven by hard plastic materials. Operators should not remove coins with their hands to avoid hitting the instrument; Do not remove the support without understanding the specific situation. As long as there is no SIM on the surface of the workpiece, remove it immediately after use. This is also a result that has been overlooked by previously used materials and old-fashioned instruments.

Above is the use of the pressure head and the accompanying measurement microscope operation, and below is everyone's sharing of the usage method of the pressure head. That is to burn the pressure head once, and immediately switch between the pressure head and the workpiece after the measured pressure head contacts; There is no need to measure the pressure head, otherwise the error will be small (<2 millimeters).

The latest generation of Smart Scope optical systems from Zeiss are designed and manufactured seamlessly. The translational microscope allows you to magnify from 125 to 250 times. In addition, the oversized objective and Colibri 3 objective have a larger field of view and dense aperture. You just need to put the lens into the microscope and lightly press it to change the magnification from 1 × To 200 ×。 Finally, achieving some contrast makes the operation simple. Smart Scope is designed specifically for various tasks in the field of task control. Equipped with digital imaging technology, gamma ray, DIC and atomic force microscopy technology, three-dimensional fluorescence, dual focus X-ray, SPIE IMV, and nano EMCCD technology.

The new type of ARM processor and 90 ° rotating piezoelectric ceramic flat panel detector launched by EMTEK company has a 360 ° high and low scanning resolution, which can achieve the best imaging and analysis performance.

By contacting predetermined dynamics, experiments on spinal cord injury under special stress conditions can be achieved;

It can be combined with the installation of a Le strain piezoelectric ceramic sample chamber, which not only maintains the loading direction, but also adds or eliminates the influence of other materials, causing new phase switching tests on samples of different scales;

No need to apply peak voltage, 10% -20%, 0-35%; And there is no need for recalibration, greatly reducing the damage load of the instrument;

Mainly engaged in product research and development, production, distribution network promotion, and research on third-party software.